Lejeune Underground
heart and soul of our Camp Lejeune and Jacksonville community
Login - Create Account - Help
Clean out your garage on Lejeune bookoo! Or find local garage sales on Yard Sale Search.com
PCSing? Win the lottery? Explore Camp Lejeune Housing courtesy of Military Real Estate!

POLL: Is this more then 45* angle?

who's talking here?

Hippie_Momma(Sharon) 1
Kappy 6
The Original LM 3
Boobsy McNiceass 3
Mary Katherine Gallagher 1
nicole 10
♥LifeIsLove♥ 2
notyme 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

POLL: Is this more then 45* angle?

So.. I'm having a hell of a time installing my soon to be baby's car seat (I'm going to blame the heat and it weighing 26lbs, not fitting in the center because otherwise both front seats would have to be all the way forward making it impossible to drive)I have finally gotten it to where it doesn't move at all in any direction. It's a radian xtsl rearfacing outboard, also tethered. but now I'm worried it's reclined too far back. I can't find a lot of pictures to go off of because most people are trying to make them more upright because their child is older and has head support. 45* is the proper angle for an infant/ new born rear facing. Photobucket it really doesn't look more reclined then an infant carrier in my opinion.

Yes Vote
 
 100.0% (8)
No Vote
 
 0.0% (0)
nicole --- 16 years ago -

So.. I'm having a hell of a time installing my soon to be baby's car seat (I'm going to blame the heat and it weighing 26lbs, not fitting in the center because otherwise both front seats would have to be all the way forward making it impossible to drive)I have finally gotten it to where it doesn't move at all in any direction. It's a radian xtsl rearfacing outboard, also tethered. but now I'm worried it's reclined too far back. I can't find a lot of pictures to go off of because most people are trying to make them more upright because their child is older and has head support. 45* is the proper angle for an infant/ new born rear facing. Photobucket it really doesn't look more reclined then an infant carrier in my opinion. 

Boobsy McNiceass --- 16 years ago -

That just doesn't look right to me. But I am used to infant carriers. 

♥LifeIsLove♥ --- 16 years ago -

Take it to the Jacksonville FD. 

nicole --- 16 years ago -

But I am used to infant carriers. and thats my problem. I've never used a convertible for a new born. I've only found 2 pictures and one looks just as reclined (though hard to tell because it doesn't have the whole base in the picture) here and then this one that only appears to be slightly more upright, but the seat isn't touching the car seat back all the way, but looking at different pieces of it and comparing it to what I see in mine it's only a little off here we plan on going to a car seat inspection location, only the closest one to us is in Kinston, and thats not really close at all :( 

Boobsy McNiceass --- 16 years ago -

Take it to the Jacksonville FD. That's probably your best bet Nicole. 

nicole --- 16 years ago -

Take it to the Jacksonville FD. That's probably your best bet Nicole. Theyre not a certified car seat inspection location (grant it in most big cities the fire stations have someone there trained, they're not in Jacksonville. I've already called to confirm :( I have hopefully 9 weeks to get to Kinston though.. 

♥LifeIsLove♥ --- 16 years ago -

The one behind Toys R Us is. 

Boobsy McNiceass --- 16 years ago -

Oh wow, I didn't know that. They had carseat inspections at Babies R Us a few times. Maybe you could call and see when they are having the next one? 

nicole --- 16 years ago -

my second attempt, Photobucket maybe the third I will find a happy medium. 

notyme --- 16 years ago -

Woman, thats the biggest damn set for a bay I have ever seen, in no way would I place a new born baby in that monster...LOL That thing is as big a Cadillac... But I hope you get it figured out, and congrats on the new little one. 

nicole --- 16 years ago -

yeah, it rear faces to 45lbs which is why I chose it. We have money set aside just in case the baby comes out too little and won't fit in the seat properly. So I'll send someone on a car seat run. But my daughter was 7lb 8 oz,21inches and I'm assuming this one will be bigger, so hopefully it will work nicely. It is tested on infants 6lbs in both frontal and side collisions and scored 4 stars in both (which apparrently in general, it's the only seat that has scored 4 stars in both areas)... but it might prove to be a learning lesson for me, hah. 

Kappy --- 16 years ago -

You need to get some pool noodles and put it under the base of your car seat. I wouldn't be very comfortable with that much of the base off of the vehicle seat. The first picture is over reclined, but the second picture shows that it isn't reclined enough. Take a piece of paper and fold a corner over until the sides of paper are flush. The angle that is created by the piece of paper is 45*. Sit the paper on the seat next to the buckle, if the angle is aligned with the seat then you're good to go. Theyre not a certified car seat inspection location (grant it in most big cities the fire stations have someone there trained, they're not in Jacksonville. I've already called to confirm :( I have hopefully 9 weeks to get to Kinston though.. Station 1 by the police department has CPS techs available. 

Kappy --- 16 years ago -

Also, to ensure a good install make sure there is no more than 1" of movement at the belt path (where your LATCH strap goes through the rear-facing path). Radians can be a PITA to install. 

The Original LM --- 16 years ago -

I had ours installed at the FD over by the mall before the birth of both kids. We had one of those noodle things that Kappy is talking about, I found it in a thrift store a few years ago, but I just threw it away about a month ago. 

nicole --- 16 years ago -

no fear about the 1" hah. If my seats move at all I do it again. You can't use pool noodles or rolled towels with a radian. It's not off the base there is a "boot" that is used while rear facing that makes it sit like that. Google pictures of it and all their seats reafacinG and you'll see the same thing. You can even YouTube the video of a sunshine kids guy installing it rear facing and it looks the same. Thanks for the piece of paper trick, I'm going to try it. It's 92 today so third attempt will probably take place tomorrow. 

Hippie_Momma(Sharon) --- 16 years ago -

I just have to say kudos for picking a great seat. 

Kappy --- 16 years ago -

You can't use pool noodles or rolled towels with a radian. It's not off the base there is a "boot" that is used while rear facing that makes it sit like that. Google pictures of it and all their seats reafacinG and you'll see the same thing. You can even YouTube the video of a sunshine kids guy installing it rear facing and it looks the same. Oooh, I didn't notice the boot. Learned something new. I only know the basics about those seats. The size of the Radians totally turns me off, but that rear-facing limit is quite nice. With the paper trick, another way is to lay the angle side on the back of the seat (where baby's back sits). If the angle is correct the 90*, created by the paper, will be straight up (not leaning). 

Kappy --- 16 years ago -

Oh BTW, I hear most newborns will fit properly in a Radian XTSL. So I wouldn't expect that to be a problem. 

nicole --- 16 years ago -

Oooh, I didn't notice the boot. Learned something new. I only know the basics about those seats. The size of the Radians totally turns me off hahah, my husband has sat out there with me while I install it doing the tightening of things for me and he hates the seat because the back is so high. He'll be mumbling under his breath "of course a kid can sit into this seat until 80lbs, because no one can sit in the front seat" 

The Original LM --- 16 years ago -

I bought my truck a few hours before I found out we were expecting. We discovered that fitting a rear facing seat in my truck blows. We had a Graco Snugride and now we have an Evenflo Titan and the front seat has to be pushed way forward for both..... Two months until I can turn him. I'm looking forward to having some leg room. 

Kappy --- 16 years ago -

LM, have you tried adjusting the recline of his seat? 

The Original LM --- 16 years ago -

There is no reclining thing on his seat. 

nicole --- 16 years ago -

success! Photobucket Researched the paper trick a little more to make sure I was doing it accurately, and then I made my hubby losen and retighten until it was spot on. Very happy now. 

Mary Katherine Gallagher --- 16 years ago -

I had a 9lb6oz baby in September and I chose not to put him in a convertible. I don't like where the shoulder straps come out. I hope it works for you! :) 

nicole --- 16 years ago -

I don't like where the shoulder straps come out. what do you mean? Like height wise? I won't be using it if the shoulder straps come above the baby's shoulders? They say below and right at for rearfacing, and then front it's right at no more then I think a 1/2 inch above.. but not below. 

Kappy --- 16 years ago -

There is no reclining thing on his seat. You can adjust the recline by the way you install the seat. Only newborns and infants with poor head control need a 45* angle. Older infants and toddlers can be as upright as 30*. You can get a more upright recline by putting more pressure on the rear-facing belt path. Doing that can actually give the person in front of the seat a lot more leg room. They say below and right at for rearfacing, and then front it's right at no more then I think a 1/2 inch above.. but not below. Right. Rear-facing is right at or below the shoulders at the closest harness slot. Forward-facing is right at or above the shoulders at the closest harness slot. 

nicole --- 16 years ago -

You can adjust the recline by the way you install the seat. Only newborns and infants with poor head control need a 45* angle. I think she wants less recline so she can have more room in the front seat. Two months until I can turn him. I'm looking forward to having some leg room. have you tried to reinstall it to make it more up right? I know from all the googling I have been doing recently there is little "tricks" to getting it to a 30 degree angle as opposed to the infant 45 degree angle. All the different angles my new baby's seat has seen seems like it should be possible for most seats, but it's only 2 months away, and you're probably semi used to the no leg room by now. :) ---------------------------- hah, my car seat angle has once again changed. I decided even though the angling techniques were matching up something had to be wrong with it because it still appeared too far back. 

page 1
Login to add your comments!

see more discussions about...

polls

Terms of Service - Privacy Policy - Ice Box

Lejeune Underground